USB Ultrasonics
PC Based Ultrasonics
CorroSENSE
RotaSCAN
cRIO Hardware
Condition Monitoring
Transducers
GSM
tSCAN
Accessories

CorroSENSE Ultrasonic Corrosion Monitoring System

Permanent Corrosion Monitoring System

CorroSENSE is a new permanently installed corrosion monitoring system from Tribosonics Ltd that can be developed on a bespoke basis. CorroSENSE consists of a permanently installed multichannel ultrasonic platform with a user configurable number of ultrasonic sensors permanently installed on the asset to be monitored.

CorroSENSE is a flexible platform with options such as a channel count from 1 to 128 channels, communication options include Ethernet, USB, GSM, Zigbee and Bluetooth, and back end data management that can be combined with Cloud Storage and automatic analysis of data. Periodic handheld ultrasonic measurements of wall thickness at the same location carried out by a qualified NDT technician often results in considerable variation in the measurements. One of the main reasons for this is the human factor – variation in the measurement due to the measurement position being ever so slightly different each time. CorroSENSE removes this human factor by permanently installing the sensors, so that they do not move or change between readings. This increased positional accuracy provides significantly improved wall loss information to the asset manager or owner. Measurement costs can be reduced using CorroSENSE products. The measurements can be performed remotely removing the need for a trained operator to visit the site every time a measurement is to be made thus radically reducing associated measurement costs. 

CorroSENSE 16

CorroSENSE 1 / 8 / 16 / 32

CorroSENSE 1 / 8 / 16 / 32 are a series of corrosion monitoring systems in 1 / 8 / 16 / 32 channels respectively.

CorroSENSE 1G / 8G / 16G / 32G

CorroSENSE 1G / 8G / 16G / 32G are ultrasonic NDT GSM enabled corrosion monitoring systems in 1 / 8 / 16 / 32 channels respectively. The GSM communication allows for remote access over the GSM and associated networks. There are several options to access the CorroSENSE unit. A text message can be sent from any mobile phone (with associated security protocol) to command the unit to perform measurements and then text back the results. Alternatively the unit can transmit data to the Tribosonics Data Logging website where measurements, waveforms and trends can be visualised, managed and downloaded.

CorroSENSE 1B / 8B / 16B / 32B

CorroSENSE 1B / 8B / 16B / 32B are Blutooth enabled corrosion monitoring systems in 1 / 8 / 16 / 32 channels respectively.

CorroSENSE 32A

CorroSENSE 1A / 8A / 16A / 32A

CorroSENSE 1A / 8A / 16A / 32A  are corrosion monitoring systems in 1 / 8 / 16 / 32 channel configurations respectively for which ATEX certification can be achieved.